Retique It - Polyacrylic is formulated to offer excellent results on bare or sealed wood, Retique It Polyacrylic is a water based poly that adds excellent sheen and protection . It is easy to apply and provides a depth of finish that revives and protects any original finish. With Retique It Polyacrylic you can still add furniture wax over it for extra sheen.
Retique It Hard Wax Oil
Retique It® Hard Wax Oil is a blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.
Produces a quick drying, natural satin / matt water repellent, tread-fast finish that will not peel or flake. To maintain / renovate, simply wash, buff or re-apply, following the guidelines below.
Suitable for application onto children’s toys – EN 71-Toy Safety Certification
Resistant to liquids: Tested in accordance with BS 3900 G5
Resistant to wear: Tested in accordance with BS3900 E15
Polytique It Exterior Marine Top Coat
Polytique It® Exterior Topcoat is a water-based, marine grade sealer with three UV stabilizers as well as mold and mildew resistance built in.
Polytique It® is designed to protect wood and painted finishes against water, wind and sun damage. This sealer will even flex with the surface as it expands and contracts due to temporary changes.
Polytique It® is an eco-friendly, low order, ultra-low VOC topcoat that goes on with a cloudy white hue drying to a beautiful clear finish that will not discolor your painted surfaces, even the whitest whites. Clean-up is as easy as soap and water.
Retique It Tripletique
Retique It® Tripletique is a high solids, super hard, scratch restistant, clear finish with exceptional clarity. It is by far our hardest and clearest waterbased top coat.
Tripletique will build to a high depth very quickly due to its high solids content.
Tripletique will not yellow even the whitest of white painted finishes. Tripletique is a low odor, ultra-low VOC* top coat that can easily be applied indoors.
Directions: USE ONLY IN A WELL VENTILATED AREA
Before application, use a lint free cloth to make sure the area to be sealed is free of dust or debris.
Stir Well: Never Shake. Use a good quality brush or sprayer. When spraying, always follow the manufacturer’s setting and thinning recommendations.
Apply 2-3 coats thin coats, allowing each coat to dry for 4 hours under ideal conditions - 70° F / 25% to 50% relative humidity. Cooler temperatures and/or higher humidity may require longer drying times.
Clean up with soap and water. 5. Keep objects off the finish until fully cured... (3-10 days dep. on humidity) * VOC less than 5g/L.